-40%

Microwave Doppler Radar Motion Detector Sensor RCWL-0516 Module Board -US Seller

$ 1.9

Availability: 34 in stock
  • Termination Type: Connector
  • California Prop 65 Warning: N/A
  • Country/Region of Manufacture: China
  • Model: RCWL-0516
  • Current Type: DC
  • Condition: New
  • MPN: EM-SENSR-0013
  • Output Type: Digital
  • Brand: Unbranded
  • Sensor Type: Solid State
  • Modified Item: No
  • All returns accepted: ReturnsNotAccepted

    Description

    RCWL-0516 Microwave Doppler Radar Sensor Motion Detector Module Board
    Description:
    The RCWL-0516 is a small proximity sensor that uses Dopler Radar to sense the presence of an intruder. It is very versatile and can be used on its own or in conjunction with a microcontroller or microcomputer.
    This device does not consume much current and operates in a range of 4 to 28 volts, making it an ideal component for a battery-powered design.
    The microwave antennas are integrated onto the small printed circuit board, making it a completely self-contained unit.
    The RCWL-0516 also support an optional light-dependent resistor (LDR) to allow the device to operate only in darkness. This can be very useful in light control applications.
    The RCWL-0516 employs “Doppler Radar” to detect movement and thus trigger a proximity alert.
    The device has an integrated 3.3 volt voltage regulator which can provide up to 100 mA of current for powering external logic circuitry.
    Specifications:
    Operating Voltage: 4V - 28V, 5V - 12V recommended
    Operating Current: 2.8mA (typical); 3mA (max)
    Maximum Detection Distance: ~7m
    Transmitting Power: 20mW (typical); 30mW (max)
    Output Control Low Level: 0V
    Output Control High Level: 3.3V
    Operating Temperature: -20~80 C
    Storage Temperature: -40~100 C
    PINOUT:
    V3: 3.3V power output, can be used as a reference voltage or as a low current  (less than 100mA) 3.3V power supply.
    GND: Ground
    OUT: Control output; when a moving object is detected, it will output high level 3.3V
    VIN: 4-28V Input voltage
    CDS: CDS photodetector output.
    Package includes:
    RCWL-0516 Module Board
    NOTE: *SORRY! PICK UP IS NOT ALLOWED!*
    Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct part. Please be informed that we do not hold any responsibility for damages caused by wrong installation or wrong purchase.
    If you have any questions or clarifications regarding the item,please don't hesitate to ask before purchase.
    SHIPPING INFORMATION
    For
    INTERNATIONAL
    orders, please be advised that we
    cannot
    guarantee exact delivery date. It may vary depending on your local customs/post office regulations.
    Kindly contact us if you require any further assistance and we'll be glad to assist you.
    TERMS AND RETURN POLICY
    Change Address
    -
    If you are requesting to change your address, please let us know ahead of time. Otherwise, your order will be shipped to the address that you provided in your eBay/PayPal record.
    Cancelled Transactions
    -
    We can cancel transactions, just let us know so we can process it immediately. We might provide an RMA number or further instructions if in case the item was already shipped.
    Received Wrong Item/Not as Described
    - We're humans and we intermittently commit mistakes but we are keen to correct them, in a way that the buyer prefers. If the item received was wrong or not the same as shown in the product listing photos, we will require you to send actual photo/s of the item received, along with its packaging (showing the label on the package). This is our SOP, for us to be certain and for record purposes.
    DOA/Damaged Upon Receipt
    - We make sure our items are properly packaged before shipping to avoid damages on the item. In case you received a damaged item, which might have been caused by shipping, please send us photos of the received item along with its packaging (showing the label on the package) for us to check and report immediately to our shipping department so they can take further action.
    Defective/Incompatible
    - We get our items in bulk so there is a little chance that some would be defective. We require you to send us photo/s of the item received and also your original item (for incompatibility issues) so we can compare the items and conduct necessary actions. If you feel like you need to return an item, please let us know the
    REASON
    so that we can provide RMA instructions.
    If any of these did not answer your concern, please contact us through "MY MESSAGES" or "ASK SELLER QUESTIONS"
    and we'll be glad to assist.