MakerHawk 4pcs Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino

Description

MakerHawk 4pcs Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino DIY Kit Brand: MakerHawk
Product Details
Product Dimensions: 1.2 x 0.9 x 0.4 inches ; 0.96 ounces
Shipping Weight: 1.1 ounces
#3 in Vibration Sensors
This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration.
When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums.
Working Voltage: 3.3V or 5V. Working Current: 1mA. Interface Type: Analog Output.
Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration.
Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerHawk-US" and click "Ask a question" to email us! Looking forward to your consultation!
Description:Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate.When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.Technical Parameter:Working Voltage: 3.3V or 5VWorking Current: <1mAOperating Temperature Range:－10℃～＋70℃Interface Type: Analog Signal OutputItem Size: 30mm x 23mmGPIO:S; signal output,+; power supply (VCC),-; ground (GND)Input: Positive electrode of the piezoelectric ceramicGnd: Negative electrode of the piezoelectric ceramicFeatures:1. S-port is connected with the controller's analog input pin.2. 5V and GND are respectively connected the power supply of + 5V and GND.3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.Package Including4 Ceramic Piezo Vibration Sensor
ASIN: B07KS5NV4V
SJDM